Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 23

Paper Trays & Loading Media Satisfaction Guide for Paper Tray 4 Stock Size Weight Capacity Type or condition Reliable feeds may be expected 8 x 10 inches to 17 x 11 inches (203 x 254 mm to 432 x 279 mm) Substance 16 to 110 (60 to 200 g/m2) Less reliable feeds may be expected 550 sheets, substance 20 (75 g/m2) Xerographic bond paper in good condition Drilled stock, fanned thoroughly Slightly curled paper Intermixed weights Xerox vellum Full cut tabs Label stock Adhesive drafting film Paper with reinforced edges Suggested alternatives Smaller or larger sizes cannot be used. Weights outside the limits shown are not recommended. Substance 110 (200 g/m2) must be long grain except 17 x 11 inch (432 x 279 mm) substance 110 (200 g/m2) which must be short grain. Do not use excessively curled paper Substance 110 (200 g/m2) must be long grain. Do not use short grain. Refer to the "Using various stocks" section for any stock not defined in this guide. Satisfaction Guide for Paper Tray 5 Stock Size Weight Reliable feeds may be expected 8 x 10 inches to 17 x 11 inches (203 x 254 mm to 432 x 279 mm) Substance 16 to 110 (60 to 200 g/m2) Less reliable feeds may be expected Capacity Type or condition 2600 sheets, substance 20 (75 g/m2) Xerographic bond paper in good condition Drilled stock, fanned thoroughly Slightly curled paper Intermixed weights Xerox vellum Full cut tabs Label stock Adhesive drafting film Paper with reinforced edges Suggested alternatives Smaller or larger sizes cannot be used. Weights outside the limits shown are not recommended. Substance 110 (200 g/m2) must be long grain except 17 x 11 inch (432 x 279 mm) substance 110 (200 g/m2) which must be short grain. Do not use excessively curled paper Substance 110 (200 g/m2) must be long grain. Do not use short grain. Refer to the "Using various stocks" section for any stock not defined in this guide. DT6180 HandyBook 23