Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 72
Clean the Bin B Bindexer Sensor Q1206
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
5. Close and latch the bindexer door. 6. Close the left Finisher Door. Solutions in Alphabetical Order Clean the Bin B Bindexer Sensor (Q1206) 1. Open the left Finisher Door. The handle is above Paper Tray 3. 2. Open the Bindexer Door. The door is located above the Paper Tray 3 area. You should see a light green triangle pointing to a latch which is surrounded by a light green rectangle. Pull the latch to the left and open the door. 3. Inside you should see three shelves; each with an orange roller on it. Rest your index finger on any one of the rollers. Lift your finger straight up until your fingernail is against the top of the shelf. Slide your finger as far to the left of that shelf as you can. Your index finger should now be resting in a Cshaped opening. There is a C-shaped opening for each shelf and that is where the Sensors are located. The Q1206 Sensor is on the middle shelf. 4. Fold a piece of A4 (210 mm x 297 mm / 8.3 x 11.7 inch) or 8.5 x 11 inch paper. Brush the folded piece of paper across each of the opening to make sure the sensor is clear of any obstructions. 5. Close and latch the Bindexer Door. 6. Close the left Finisher Door. DT6180 HandyBook 72