Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 154
Enable Offset Stacking
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Programming Features Enable Offset Stacking NOTE: Before you begin you must be logged on as a System Administrator or Trusted User. To enable Offset Stacking using DocuSP software version 3.x or above: 1. From the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. The Printer Manager window will be displayed. 2. Select the [Stacking] tab. 3. Select [Settings]. A Settings for All Stackers window will be displayed. 4. Select the boxes for the options [Collated], [Uncollated] and [Within Stack]. A check mark will be displayed in the box if they are enabled. 5. Set how often you want the sheets to offset, under Offset Page Boundary (between 8 to 100). 6. Select [Ok]. To enable Offset Stacking using DocuSP software version 2.x or below: 1. From the DocuSP Print Services window, select [Printer Manager]. The Print Manager window will be displayed. 2. Select [Options] on the toolbar. A menu will be displayed. 3. Select [Stacking] from the menu. The Unfinished Offset Stacking window will be displayed. 4. Select the boxes for the options [Collated], [Uncollated] and [Within Stack]. A check mark will be displayed in the box if they are enabled. 5. Set how often you want the sheets to offset, under Offset Page Boundary (between 8 to 100). 6. Select [Ok]. 7. Select [Close]. DT6180 HandyBook 154