Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 27

Recommended Shift Preventative Maintenance Plan 3. Recommended Shift Preventative Maintenance Plan Regular operator maintenance of your equipment is likely to improve overall performance. The maintenance could be done at the beginning or end of the shift, which ever is decided upon by your team. The following are suggested maintenance activities. 1. Clean All Sensors. 2. Full Shutdown and Restart. 3. Check and Fill Fuser Agent. 4. Shift handoff communication between operators regarding system issues encountered on previous shift. 5. Clean Dicorotron Shields (NOTE: Only perform this task if you have been eXcellerate Trained. Refer to your eXcellerate training materials for details.) Shift preventative Maintenance Plan Details 1. Clean All Sensors. Clean Finisher Entrance Sensor (Q1201) Clean the Bin A Bindexer Sensor (Q1205) Clean the Bin B Bindexer Sensor (Q1206) Clean the Binder Tape Guide Sensor (Q1213) Clean the Bindexer Sensors (Q1205, Q1206, Q1207) Clean the Bins Exit Sensors (Q1222)Error! Bookmark not defined. Clean the Front Stack (Q1227), Rear Stack Height (Q1218), and Set Path (Q1221) Sensors Clean the Fuser (Q1010) and Prefuser Sensors (Q1009) Clean the Post Inverter (Q1202) and Output Transport (Q1203) Sensors Clean the Pre-Fuser Sensor (Q1009) Clean the Registration Transport Sensor (Q861) Clean the Set Path Sensor (Q1221) Clean the Tape Binder Area DT6180 HandyBook 27