Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 57
Related Fault
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Problem Solving Area Detail Solutions following Problem table? Case # Problem Related Fault Codes Potential Solutions /Solutions Ranked by Relevance: F Jammed binder tape, such as binder tape sticking together, or cosmetic defects in the bound book F Binder tape not positioned correctly on the top edge of the output prints F Binder tape is too long or too short on the bottom edge of the output prints this guide. 3. If the processor has a ground fault protector, determine whether the protector has shut off the power. If the red light is visible on the protector, proceed with step 4. If the red light is not visible, something other than the protector has shut off the power. Refer to the problem "Processor power is off unexpectedly, and the ground fault protector did not trip," in this section. 4. Press the reset button on the processor ground fault protector. If the red light switches off, proceed with step 5. If the red light does not switch off, or immediately switches on again, refer to the procedure, "Calling for assistance", in this guide. 5. Switch the white-handled circuit breakers near the protector to the on (up) position. If the power comes on, proceed with step 6. If the circuit breakers immediately switch off again, call for assistance. 6. Select the Reset icon on the fault frame. This should clear the fault. 7. Clear any other faults that may be declared. Do not clear the paper path unless directed to do so. The system will maintain job integrity. 8. If the power repeatedly switches off unexpectedly, call for assistance. Replace the tape reel with a new reel N using the procedure, "Replace the Binder Tape Reel," in "Replacing Consumables". Refer to the binder tape reel storage information in the Operator Guide.. Adjust the binder tape registration using N the procedure, "Adjust the Binder Tape Registration," in "Machine Maintenance" Chapter. Adjust the binder tape length using the N procedure entitled "Adjust the Binder Tape Registration," in "Machine Maintenance" Chapter. DT6180 HandyBook 57