Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 81
Cleaning the Q1009 Sensor
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Solutions in Alphabetical Order 5. Use a cotton swab to clean this mirror and the small plastic sensor to the right of the mirror. Make sure you do not touch the hot surfaces in this area. Cleaning the Q1009 Sensor: 6. To the left of Paper Tray 1, at the back of the Fuser Module, locate the area 7 label on the machine frame. 7. Look inside the cutout area. You may need to kneel down so you can see inside the cutout. To your left is a clear plastic bottle containing Fuser Agent. Inside the cutout, and coming out on the side of the plastic bottle, is a shiny metal tab. The right surface near the top of that tab is a mirror. About 10 mm (3/8 of an inch) to the right, facing the mirror, is the Q1009 sensor. 8. Clean the mirror and sensor with a small amount of Lens and Mirror Cleaner on a soft, lint-free cloth. 9. Push the Fuser Module firmly back into the machine. 10. Close the Processor Doors. DT6180 HandyBook 81