Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 129
If the Job is Sent From a DigiPath, Clean the Document Glass on, the DigiPath, Lower the Decurler
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4. Select [OK]. Solutions in Alphabetical Order If the Job is Sent From a DigiPath, Clean the Document Glass on the DigiPath Clean the Document Glass often to make sure that scanning is of the best possible quality. Keeping the Document Glass clean will result in fewer misfeeds when using the multisheet or single sheet feeder functions of the Document Handler. CAUTION: Use only water or Xerox Lens and Mirror Cleaner to clean the glass. Pour the cleaner on the cloth. Do not pour the cleaner directly on the glass. 1. Dampen a lint-free cloth with water or Xerox Lens and Mirror Cleaner. 2. Raise the Document Handler. 3. Clean the glass as you would clean a window. Make sure that you clean all of the corners as well. 4. Wipe off excess moisture with a dry, lint-free cloth. 5. Lower the Document Handler. Lower the Decurler Baffle Above Area 7 1. Open the right Processor Door. 2. Locate the release knob. The release knob is a small black knob located just below the Top Cover, and just to the right of the closed left Processor Door. 3. Make sure the knob is pressed inwards. 4. Close the Processor Door. DT6180 HandyBook 129