Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 76
WARNING: You may have to hold the bypass transport in the raised position if it lowers into,
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Solutions in Alphabetical Order WARNING: You may have to hold the bypass transport in the raised position if it lowers into the original position. 3. Stand directly in front of Finisher, just to the right of Paper Tray 3. 4. Look between the brown cover on your left, with the sticker of area 17, and the yellowish colored tube to your right. You may need to lean over the Finisher area to find the sensor. 5. Look for a small orange and white wires. These wires lead to the Q1222 sensor. 6. Follow the wires down to the black, round sensor. This is the top of the sensor and the bottom of the sensor is approximately 76 mm (3 inches) below it. 7. Wipe the top and bottom of the sensor gently with a soft cloth. 8. If present, lower the bypass transport. Close the Finisher Top Cover. DT6180 HandyBook 76