Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 97
Clear Paper Jams in Areas 13, 14, and 15
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Solutions in Alphabetical Order 13. Grasp the handle, push down on the top of the handle with your thumb, and then pull the baffle open toward the right. 14. Remove any paper under the baffle. 15. Close the baffle. 16. Close the Finisher Top Cover. Clear Paper Jams in Areas 13, 14, and 15 NOTE: Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper is cleared and there are no pieces of paper left in the machine. To clear area 13: 1. Open the Finisher Top Cover by lifting the handle to release the cover. Push the cover open all the way. 2. If present, the bypass transport must be raised to gain access to the sensors. WARNING: You may have to hold the bypass transport in the raised position if it lowers into the original position. 3. On the left side of the Finisher area you will see a mechanical assembly. There is a green handle on the right side of this assembly. Grasp the handle and push down on the top of the handle with your thumb, then pull the baffle open toward the right. DT6180 HandyBook 97