Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 114
Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Solutions in Alphabetical Order 7. Push the Fuser Assembly into the machine until it stops. To clear area 5: 8. To the left of Paper Tray 2 is a green handle with an arrow on it. Rotate the handle to the right, and hold it in this position. 9. Remove all paper from the area to the left of Paper Tray 2. 10. Rotate the handle to the left. 11. Close the Processor Doors. NOTE: Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper was cleared and there are no pieces of paper left in the machine. DT6180 HandyBook 114
Solutions in Alphabetical Order
DT6180 HandyBook
114
7.
Push the Fuser Assembly into the machine until it stops.
To clear area 5:
8.
To the left of Paper Tray 2 is a green handle with an arrow on it. Rotate the handle to the right, and
hold it in this position.
9.
Remove all paper from the area to the left of Paper Tray 2.
10. Rotate the handle to the left.
11. Close the Processor Doors.
NOTE:
Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the
rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper was
cleared and there are no pieces of paper left in the machine.