Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 136
Push the Fuser Drawer in until it latches in place. Make sure that the drawer is latched before
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Solutions in Alphabetical Order 4. Facing the machine, locate the Camming Motor on the back left side of the Fuser Drawer. 5. Reach under the Camming Motor and locate the Camming Motor Brake Release on the bottom of the Camming Motor. The brake looks like a silver / gray square metal plate. 6. Push up on the Camming Motor Brake Release and hold the brake in the up position until the Camming Motor mechanism stops. You will see the Fuser Rollers separate slightly. 7. Push the Fuser Drawer in until it latches in place. Make sure that the drawer is latched before closing the Processor Doors. 8. Close the Processor Doors. DT6180 HandyBook 136
Solutions in Alphabetical Order
DT6180 HandyBook
136
4.
Facing the machine, locate the Camming Motor on the back left side of the Fuser Drawer.
5.
Reach under the Camming Motor and locate the Camming Motor Brake Release on the bottom of
the Camming Motor. The brake looks like a silver / gray square metal plate.
6.
Push up on the Camming Motor Brake Release and hold the brake in the up position until the
Camming Motor mechanism stops. You will see the Fuser Rollers separate slightly.
7.
Push the Fuser Drawer in until it latches in place. Make sure that the drawer is latched before
closing the Processor Doors.
8.
Close the Processor Doors.