Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 25
Stock type, Instructions for use
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Paper Trays & Loading Media Stock type • Never-tear • 3 hole drilled, edge reinforced, 4024 DP paper • Transparencies with a 0.5 inch (13 mm) white stripe • Removable stripe • Transparencies • Tabs • Preprinted stock • High speed • transparencies with white • stripe • Label stock • Letterhead (preprinted) Instructions for use holes to the left. Do not bind or run 2-sided prints. Do not bind or run 2-sided prints. Do not stitch or bind. Do not run with tabs. Tabs can be inserted off-line. For optimum satisfaction, use the paper trays 1 and 2 plate assembly. The plate assembly can be ordered by a Customer Service Representative. Up to 500 sheets can be placed in the tray. Load the paper into all trays with holes to the left, reinforced side down. Select Properties... on the Trays pull-down menu. On the Stock window, under Type, select Drilled. Image quality problems may occur near the reinforcement with side 2 printing. Remove the paper immediately before use to ensure that prints stay flat. Print with no more than 200 sheets in a tray. Select a quantity of 50 or fewer at a time. Load the stock with the white stripe to the right into trays 1 and 2. Load the shiny side up for optimum performance. Do not load more than 50 removable-stripe transparencies into trays 1 and 2. With the white stripe to the right, place the transparencies on top of approximately 50 sheets of paper in the tray. Do not run as inserts to a bound job. Printing is not allowed on inserts. Mylar tabs should be run out of tray 4. Preprinted forms must be made up of ink that has the following characteristics: • Can withstand temperatures up to 400°F (204°C) • Can withstand pressure of 140 psi at the above temperature • Can withstand the above conditions for 25 Milliseconds Load the stock with the stripe to the right in trays 1 and 2. Load the stock face up into trays 1 and 2; face down into trays 3, 4, and 5. Do not select 2-sided prints. Load the paper into trays 3, 4, and 5; side 1 with the printed side down, top edge to the front of the tray. DT6180 HandyBook 25