Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 85
Clean the Registration Transport Sensor Q861
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Solutions in Alphabetical Order 6. Clean the sensor with a small amount of Lens and Mirror Cleaner on a soft, lint-free cloth. 7. Push the Fuser Module firmly back into the machine. 8. Close the Processor Doors. Clean the Registration Transport Sensor (Q861) The Q861 Sensor is located in area 4, behind the area 4 green handle. 1. Open the Processor Door. The handle to open the door is above and to the left of Paper Tray 1. 2. Locate the area 4 green handle which is approximately 72 mm (2 inches) directly below the left side of Tray 2. 3. Raise the green handle and the baffle that is attached, until it locks into place. 4. Locate the Q861 Sensor under the baffle. The sensor is in the front left corner and approximately 76 mm (3 inches) back from the handle. CAUTION: To avoid damage to the machine, do not use any liquids or solvents of any kind to clean the Q861 Sensor. 5. Gently rub a dry cleaning pad against the underside of the sensor, as illustrated, and move it left to right to clean the sensor. DT6180 HandyBook 85