Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 47
Enable a Paper Tray for Clean up, Enable or Disable the Binder
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
book. 7. Close the Finisher Doors. 8. Run a test job to inspect your adjustment. 9. If necessary, perform the procedure again as needed. Machine Maintenance Enable a Paper Tray for Clean up If you are using DocuSP software version 3.x and above: 1. From the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. The Printer Manager window will be displayed. 2. Right-click on the tray and select [Enable Cleanup] from the menu. A broom, in the fourth column from the left-hand side of the window, will mark the tray for clean up. 3. Repeat these steps until all trays you want enabled for clean up have a broom in column. 4. Select [Resume] in the Printer window. If you are using DocuSP software version 2.x and below: 1. From the DocuSP Print Services window, select [Printer Manager]. The Printer Manager window will be displayed. 2. Select the tray you wish to enable for clean up. A menu will be displayed. 3. Select [Enable Clean Up] from the menu. 4. Repeat these steps until all trays you want enabled have a green check mark in the Clean Up column. 5. Select [Resume] in Printer window. Enable or Disable the Binder NOTE: You will need to logon as a System Administrator to perform this task. To enable the Binder using DocuTech software version 3.x and above: 1. From the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. The Printer Manager window will be displayed. 2. Select the [Finishing] tab. 3. Under Internal Finishers, right-click on [Binder]. A menu will be displayed. 4. Select [Enable] or [Disable] from the menu. The status column will display the selection. To enable the Binder using DocuTech software version 2.x and below: 1. From the DocuSP Print Services window, select [Printer Manager]. The Print Manager window will be displayed. 2. In Printer Manager, select [Options]. A menu will be displayed. 3. Select [Finishing] from the menu. The Finishing window will be displayed. 4. Select the [On-line Finishers] tab. 5. Select [Binder]. 6. Select the Binder check box to disable or enable the Binder. A check mark in the box indicates the Binder is enabled. 7. Select [OK] to return to the Print Manager window. DT6180 HandyBook 47