Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 75
Clean the Bins Exit Sensors Q1222 - bypass
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Solutions in Alphabetical Order 4. Fold a piece of A4 (8.5 x 11 inch) paper. Brush the folded piece of paper across each of these openings to make sure the sensors are clear of any obstructions. 5. Close and latch the Bindexer Door. 6. Close the Finisher Door. Clean the Bins Exit Sensors (Q1222) NOTE: The Q1222 sensor is near area 17. 1. Open the Finisher Top Cover by pushing up on the handle in the top center of the cover. 2. If present, the bypass transport must be raised to gain access to the sensors. DT6180 HandyBook 75
Solutions in Alphabetical Order
DT6180 HandyBook
75
4.
Fold a piece of A4 (8.5 x 11 inch) paper. Brush the folded piece of paper across each of these
openings to make sure the sensors are clear of any obstructions.
5.
Close and latch the Bindexer Door.
6.
Close the Finisher Door.
Clean the Bins Exit Sensors (Q1222)
NOTE:
The Q1222 sensor is near area 17.
1.
Open the Finisher Top Cover by pushing up on the handle in the top center of the cover.
2.
If present, the bypass transport must be raised to gain access to the sensors.