Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 30

Replacing Consumables, DT6180 HandyBook

Get Xerox 6180N - Phaser Color Laser Printer PDF manuals and user guides
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Replacing Consumables 7. Open a new box of Fuser Agent and remove the bottle. CAUTION: Make sure you use the Fuser Agent specific to the machine model you are using. Fuser Agent for the machine model DocuTech 90 is not compatible with the DocuTech 135. 8. Remove the cap from the bottle of the Fuser Agent. 9. Carefully pour the Fuser Agent into the reservoir until the level reaches the Max line. CAUTION: There is an anti-splash seal in the reservoir. To avoid damage to this seal, do not push the Fuser Agent bottle into the reservoir with excessive force. WARNING: If any Fuser Agent is spilled onto the floor, it must be removed immediately as the floor can become slippery. 10. Replace the reservoir cap. 11. Push the Fuser Agent reservoir in to the machine until it stops. 12. Push the Fuser Drawer all the way into the machine until the drawer latches into place. 13. Close the Processor Doors. The Fuser Agent message will disappear after approximately 20 prints are made. DT6180 HandyBook 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Replacing Consumables
DT6180 HandyBook
30
7.
Open a new box of Fuser Agent and remove the bottle.
CAUTION: Make sure you use the Fuser Agent specific to the machine model you
are using. Fuser Agent for the machine model DocuTech 90 is not compatible with
the DocuTech 135.
8.
Remove the cap from the bottle of the Fuser Agent.
9.
Carefully pour the Fuser Agent into the reservoir until the level reaches the Max line.
CAUTION: There is an anti-splash seal in the reservoir. To avoid damage to this
seal, do not push the Fuser Agent bottle into the reservoir with excessive force.
WARNING: If any Fuser Agent is spilled onto the floor, it must be removed
immediately as the floor can become slippery.
10. Replace the reservoir cap.
11. Push the Fuser Agent reservoir in to the machine until it stops.
12. Push the Fuser Drawer all the way into the machine until the drawer latches into place.
13. Close the Processor Doors. The Fuser Agent message will disappear after approximately
20 prints are made.