Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 159
Programming Features, DT6180 HandyBook, Program the Paper Tray settings in the Printer Manager,
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Programming Features • Tray 1 - 8.5x11, Red, Plain • Tray 2 - 8.5x11, Blue, Plain • Tray 3 - 8.5x11, White, Plain 2. Program the PCL Paper Source settings in the Queue Manager: • Standard &l1H = Red, Plain • Lower &l4H = Blue, Plain • Large Capacity &l5H = White, Plain As you can see by this example, the PCL Paper Source programmed in Queue Properties does not map the physical description of the trays of a corresponding tray on the DocuSP. It is merely mapping an escape code to a media color and type that it will request. This is done because PCL does not have a specific command for media color or type. The PCL interpreter, when it encounters one of the escape sequences mention above, it will interpret the escape sequence as a media color and type that is programmed in the PCL Paper Source and will request that media. Which physical paper tray the media is loaded is of no concern, only that the size color and type is loaded in any tray. NOTE: The steps for versions 2.x and 3.x below are for the Detailed example, change your entries accordingly. DocuSP 3.x Program the Paper Tray settings in the Printer Manager: 1. In the DocuSP for DocuTech 2000 Series 61xx window select [Printer Manager]. The Printer Manager window will be displayed. 2. Right-click [Tray 1]. A menu will be displayed. 3. Select [Properties]. A Tray 1 - Properties window will be displayed. 4. Program the Size, Color, Type, and Weight for 8.5 x 11, Red, Plain, and 75 respectively. 5. Repeat steps 2-4 for trays 2 & 3, except program Color for Blue and White respectively. Program the PCL Paper Source settings in the Queue Manager: 1. In the DocuSP for DocuTech 2000 Series 61xx window select [Queue Manager]. The Queue Manager window will be displayed. 2. Right-click the Queue the job will be printed from. A menu will be displayed. 3. Select [Properties]. A Properties window will be displayed. 4. Select the [PCL] tab. 5. In the PCL section select the [Paper Sources] button. A PCL Paper Sources window will be displayed. 6. Right-click on the [Standard] source. A menu will be displayed. 7. Select Properties. A Standard window will be displayed. 8. Program the Size, Color, Type, and Weight for US Letter, Red, Plain, and 75 respectively. 9. Select [OK]. 10. Right-click on the [Lower] source. A menu will be displayed. 11. Select [Properties]. A Lower window will be displayed. 12. Program the Size, Color, Type, and Weight for US Letter, Blue, Plain, and 75 respectively. 13. Select [OK]. 14. Right-click on the [Large Capacity] source. A menu will be displayed. 15. Select [Properties]. A Large Capacity window will be displayed. 16. Program the Size, Color, Type, and Weight for US Letter, White, Plain, and 75 respectively. 17. Select [OK]. DT6180 HandyBook 159