Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 36
Close the Finisher Doors. - manual
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Replacing Consumables NOTE: If a problem occurs when you are trying to turn the green knob, close the Finisher Doors. The Screen will display a 'Please wait - Finisher Reset in Progress' message. Wait until a 'Ready' message is displayed, then open the Finisher Doors and try feeding the Binder tape again. 13. Cut the tape by lifting up on the green tape cutter handle located on the left side of the Binder assembly. Lift up the handle to manually cut the tape and then release the handle. 14. Remove the cut piece of tape. 15. Push the Binder drawer in until it stops. 16. Close the Finisher Doors. For the highest quality performance, occasionally check the Binder tape length and adjust, if necessary. DT6180 HandyBook 36
Replacing Consumables
DT6180 HandyBook
36
NOTE:
If a problem occurs when you are trying to turn the green knob, close the Finisher
Doors. The Screen will display a 'Please wait - Finisher Reset in Progress' message.
Wait until a 'Ready' message is displayed, then open the Finisher Doors and try feeding
the Binder tape again.
13. Cut the tape by lifting up on the green tape cutter handle located on the left side of the
Binder assembly. Lift up the handle to manually cut the tape and then release the handle.
14. Remove the cut piece of tape.
15. Push the Binder drawer in until it stops.
16. Close the Finisher Doors.
For the highest quality performance, occasionally check the Binder tape length and adjust, if
necessary.