Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 124
Close the Processor Door.
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Solutions in Alphabetical Order 7. Push the Fuser Module into the machine until it stops. To clear area 5: 8. To the left of Paper Tray 2 is a green handle with an arrow on it. Rotate the handle to the right, and hold it in this position. 9. Remove all paper from the area to the left of Paper Tray 2. 10. Rotate the handle to the left. To clear areas 4: 11. Grasp the green handle located in the lower left corner of the machine; approximately three inches from the bottom. 12. Pull the handle out toward you, and up at the same time. 13. Remove all paper in the area below Paper Tray 2. 14. Pull the handle toward you, then release and lower the handle into position. 15. Close the Processor Door. To clear area 2: 16. Open the right Processor Door using the handle above Paper Tray 1. 17. Lift the green handle in the lower right corner of the machine; approximately three inches from the bottom. 18. Remove all paper from this area. DT6180 HandyBook 124