Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 82
Clean the Post Inverter Q1202 and Output Transport Q1203, Sensors
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Solutions in Alphabetical Order Clean the Post Inverter (Q1202) and Output Transport (Q1203) Sensors NOTE: The Q1202 and Q1203 Sensors are in area 12. 1. Fold a sheet of 216 mm x 279 mm (8.5 x 11 inch) or A4 (210 mm x 297 mm / 8.3 x 11.7 inch) paper twice to make a 51 mm (2 inch) wide strip. This will be used to clear the sensor. 2. Open the Finisher Doors. The handle for these doors is located above Paper Tray 3. 3. Open the Finisher Top Cover. 4. When you open the Finisher Top Cover you will see a mechanical assembly on the left side of the machine. The assembly has two sensors toward the front of the machine. The sensors are shiny, black plastic rectangles, 6 mm (¼ inch) wide and 51 mm (2 inches) from front to back and have a red, an orange, and a purple wire leading to them with small white lettering. The Q1203 sensor is on the top front area of the assembly, and the Q1202 sensor is on the left side of the assembly, about 254 mm (10 inches) from the top. 5. Pull on the green handle to open the access plate between the two sensors. Opening the access plate allows easier access to both sensors. DT6180 HandyBook 82