Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 145
Check the Systems Queue Output Location and Finishing, Selections
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Perform Printer Functions 4. Check the Systems Queue Output Location and Finishing Selections NOTE: Before you begin you must be logged on as an Administrator. See the Related Items below for additional information. If you are using DocuSP version 3.x: 1. From the DocuSP Print Services window or the DocuSP for DocuTech 2000 Series 61xx window, select [Queue Manager]. The Queue Manager window will be displayed. 2. Double-click on the queue you are looking at. 3. Select the [Output Tab]. 4. Under the Output Location section, select [System Specified]. 5. Under the Finishing section, select the Finisher / Booklet Maker you want to send the job to. 6. Make sure there is no check mark in the box next to [Override]. You may need to click on the box to remove the check mark. 7. Select [OK]. If you are using DocuSP version 2.x: 1. From the DocuSP Print Services window, select [Queue Manager]. The Queue Manager window will be displayed. 2. Double-click on the queue you want to view to open the queue properties. 3. Under Extended Options, select [Output...]. 4. Set the output to [System Specified]. Output Location is on the left-hand side. 5. Under the Finishing section, select the Finisher / Booklet Maker you want to send the job to. 6. Make sure there is no check mark in the box next to [Override]. You may need to click on the box to remove the check mark. 7. Select [OK] twice. DT6180 HandyBook 145