Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 153
Programming Features
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Programming Features 8. Programming Features Add Binding to a Job NOTE: You must be logged in as System Administrator or Trusted User to perform this task. To Add Binding to a job in the Job Queue using DocuSP software version 3.x: 1. From the DocuSP for DocuTech 2000 Series 61xx window, select [Job Manager]. 2. Right-click the job you want to add binding to. A menu will be displayed. 3. Select [Properties]. A Job Properties window will be displayed. 4. Select the [Output] tab. 5. Under the Finishing section, select [Bind] from the drop-down menu. 6. Select [OK]. To Add Binding to a job in the Job Queue using DocuSP software version 2.x: 1. From the DocuSP Print Services window, select [Job Manager]. 2. Select the job you want to add binding to. 3. Select [Properties] from the toolbar. A menu will be displayed. 4. Select [Output]. An Output window will be displayed. 5. Under the Finishing section, select [Bind] from the drop-down menu. 6. Select [OK]. Enable Duplex Mode NOTE: Before you begin you must be logged on as a System Administrator or Trusted User. To enable Duplex Mode: 1. If you are using DocuSP software version 2.x or below, open the DocuSP Print Services window, and select [Print Manager]. The Print Manager window will be displayed. If you are using DocuSP software version 3.x, open the DocuSP for DocuTech 2000 Series 61xx window, and select [Printer] from the toolbar. A menu will be displayed. Skip to step 3. 2. Select [Options] from the toolbar. A menu will be displayed. 3. Select [Switches] from the menu. The Switches window will be displayed. 4. Under Sides Imaged, select [2-Sided]. A check mark will be displayed in the box when the feature is enabled. 5. Select [OK] to save changes and exit. DT6180 HandyBook 153