Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 83
To clean the Q1203 sensor, To clean the Q1202 sensor
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Solutions in Alphabetical Order To clean the Q1203 sensor: 6. Place the short edge of the folded paper above the white rollers on the left side of the Top Tray Feeder, as near to the front of the machine as the feeder will let you. Push the paper edge under the curved metal lip, past the near side of the black roller, and underneath the Q1202 Sensor. 7. Brush the folded piece of paper under the Q1203 Sensor a couple of times to clear any obstructions. To clean the Q1202 sensor: 8. Take the folded paper and place the short edged side into the area of the opened access plate. If you hold the paper against the right side of that opening and slide the short edge toward you, beneath the white rollers, you can work the paper under the sensor. Make sure that area is clear from all obstructions. 9. Remove the paper, then close the access plate. 10. Lower the Finisher Top Cover until you hear it latch. 11. Close the Finisher Doors. DT6180 HandyBook 83