Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 39

Close the Processor Doors. - toner

Get Xerox 6180N - Phaser Color Laser Printer PDF manuals and user guides
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Replacing Consumables CAUTION: To prevent a Toner spill, do not tip or tilt the waste container. 5. Remove the cap from the top of the full Toner Waste Container. 6. Place the cap over the opening on the end of the full Toner Waste Container. 7. Remove the new Toner Waste Container from the box. 8. Slide the new Toner Waste Container all the way into the machine until the container stops. NOTE: You do not need to remove the cap from the storage position at this time. 9. Close the Processor Doors. CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your skin or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water and mild soap. NOTE: Old waste containers should not be emptied, cleaned and used again. There is a sensor inside the container that remains dirty and the machine will not recognize the container. Save the full waste container and give it to the service technician on the next visit. The technician will dispose of it properly. This material is not a hazardous waste. DT6180 HandyBook 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Replacing Consumables
DT6180 HandyBook
39
CAUTION: To prevent a Toner spill, do not tip or tilt the waste container.
5.
Remove the cap from the top of the full Toner Waste Container.
6.
Place the cap over the opening on the end of the full Toner Waste Container.
7.
Remove the new Toner Waste Container from the box.
8.
Slide the new Toner Waste Container all the way into the machine until the container
stops.
NOTE:
You do not need to remove the cap from the storage position at this time.
9.
Close the Processor Doors.
CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or
clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your
skin or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water
and mild soap.
NOTE:
Old waste containers should not be emptied, cleaned and used again. There is a sensor
inside the container that remains dirty and the machine will not recognize the container. Save the
full waste container and give it to the service technician on the next visit. The technician will
dispose of it properly. This material is not a hazardous waste.