Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 37

Replace the Toner Dry Ink Bottle - cartridges

Get Xerox 6180N - Phaser Color Laser Printer PDF manuals and user guides
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Replacing Consumables Replace the Toner (Dry Ink) Bottle CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or clothing. This will set the Toner and make it difficult to remove. If Toner gets on your skin or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water and mild soap. NOTE: There is an eight step diagram to the right of the Toner Bottle with instructions on how to change the cartridge. To remove the Toner (Dry Ink) Bottle: 1. Open the Processor Doors. 2. Place a drop cloth or a few sheets of paper on the floor under the Toner Bottle area to catch any Toner that may spill on the flooring. 3. Pull the empty Toner Bottle out of the machine until it stops. 4. Rotate the green handle up, to the unlatched position. 5. Remove the bottle from the receptacle. NOTE: You may want to put the used Toner Bottle in the box that the new cartridge came in. Empty Toner Bottles are not returned to Xerox and can be disposed of according to your local recycling regulations. To replace the Toner Bottle: 6. Remove the new Toner Bottle from the box. Make sure you do not remove the protective DT6180 HandyBook 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Replacing Consumables
DT6180 HandyBook
37
Replace the Toner (Dry Ink) Bottle
CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or
clothing. This will set the Toner and make it difficult to remove. If Toner gets on your skin
or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water and
mild soap.
NOTE:
There is an eight step diagram to the right of the Toner Bottle with instructions on how to
change the cartridge.
To remove the Toner (Dry Ink) Bottle:
1.
Open the Processor Doors.
2.
Place a drop cloth or a few sheets of paper on the floor under the Toner Bottle area to
catch any Toner that may spill on the flooring.
3.
Pull the empty Toner Bottle out of the machine until it stops.
4.
Rotate the green handle up, to the unlatched position.
5.
Remove the bottle from the receptacle.
NOTE:
You may want to put the used Toner Bottle in the box that the new cartridge came
in. Empty Toner Bottles are not returned to Xerox and can be disposed of according to
your local recycling regulations.
To replace the Toner Bottle:
6.
Remove the new Toner Bottle from the box. Make sure you do not remove the protective