Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 49
Modify the Bindexer Capacity Number, Modify the Lighter / Darker Setting
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Machine Maintenance Modify the Bindexer Capacity Number If you are using software version 3.x and above: 1. From the DocuSP for DocuTech 2000 Series 61xx window, select [Printer Manager]. The Printer Manager window will be displayed. 2. Select the [Stacking] tab. 3. Select the [Setting] button on the lower, right-hand side of the window. The Setting for All Stackers window will be displayed. 4. Under Bindexer Capacity use the [Up] and [Down] arrows to modify the capacity or enter a new bindexer capacity. 5. Select [OK] to save the selection. If you are using software version 2.x and below: 1. From the DocuSP Print Services window, select the [Printer Manager] button. The Printer Manager window will be displayed. 2. Select [Options] from the toolbar. A menu will be displayed. 3. Select [Finishing] from the menu. The Finishing window will be displayed. 4. Select the [Finishing tab. 5. Under the Stacker Set Up section, use Slide to Select New Bindexer Number. 6. Select [OK] to save the selection. Modify the Lighter / Darker Setting NOTE: You must be logged on as Trusted User or System Administrator to perform this task. Only Trusted Users or System Administrators have access to changing the Image Quality settings. To modify the Lighter / Darker Setting using DocuSP software version 3.x or above: 1. In the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. The Print Manager window will be displayed. 2. Select the [Image Quality] tab in the Printer Manager window. The Image Quality window will be displayed. 3. Select [Printer Darkness]. 4. Make sure the Darkness Mode is set for Normal Darkness, and select a lighter or darker shade of gray depending on the desired effect. 5. Select [OK]. 6. When an Information window is displayed stating 'The change to Darkness will take effect on the next set/subset to be printed,' select [OK]. To modify the Lighter / Darker Setting using DocuSP software version 2.x or below: 1. In the DocuSP Print Services window, select [Printer Manager]. The Print Manager window will be displayed. 2. Select [Options] from the toolbar. A menu will be displayed. 3. Select [Image Quality] from the menu. The Image Quality window will be displayed. 4. Select [Printer Darkness]. 5. Make sure the Darkness Mode is set for Normal Darkness, and select a lighter or darker shade of gray depending on the desired effect. 6. Select [Apply]. DT6180 HandyBook 49