Yamaha DME32 DME32 Owners Manual - Page 101
Parameter, Range, Description, INPUT, Level, PHASE, SLOPE & TYPE, Slope, dB/oct
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Crossover 95 Section Parameter Range Description INPUT LOW HIGH Level -Infinity dB to 0.0 dB Adjusts the input signal level MUTE ON/OFF Mutes the input GAIN -Infinity dB to 0.0 dB Adjusts the LOW output signal level MUTE ON/OFF Mutes the LOW output PHASE NOR/REV Inverts the LOW output signal FREQ 20.0 Hz-20.0 kHz Adjusts the LOW LPF cutoff frequency LPF Gc1 -6 dB to +6 dB Adjusts the LOW LPF gain at the cutoff frequency SLOPE & TYPE 2 Sets the LOW LPF filter slope and type GAIN -Infinity dB to 0.0 dB Adjusts the HIGH output signal level MUTE ON/OFF Mutes the HIGH output PHASE NOR/REV Inverts the HIGH output signal FREQ 20.0 Hz-20.0 kHz Adjusts the HIGH HPF cutoff frequency HPF Gc1 -6 dB to +6 dB Adjusts the HIGH HPF gain at the cutoff frequency SLOPE & TYPE 2 Sets the HIGH HPF filter slope and type 1. Gc controls appears only when a Gc SLOPE & TYPE filter is selected. For Butterworth, Bessel, and Linkwitz-Riley, the Gc setting is ignored and the Gc value is fixed as follows: Butterworth and Bessel: -3 dB, Linkwitz-Riley: -6 dB. 2. SLOPE & TYPE parameter values are listed in the following table. The following table shows the SLOPE & TYPE settings available for each filter slope. SLOPE & TYPE THRU 6dB/oct 12dB/oct Adjustable Gc 12dB/oct Butterworth 12dB/oct Bessel 12dB/oct Linkwitz-Riley 18dB/oct Adjustable Gc 18dB/oct Butterworth 18dB/oct Bessel 24dB/oct Adjustable Gc 24dB/oct Butterworth 24dB/oct Bessel 24dB/oct Linkwitz-Riley 36dB/oct Adjustable Gc 36dB/oct Butterworth 36dB/oct Bessel 48dB/oct Adjustable Gc 48dB/oct Butterworth 48dB/oct Bessel 48dB/oct Linkwitz-Riley 12 dB/oct O O O O O O Slope 24 dB/oct 36 dB/oct O O O O O O O O O O O O O O O O O O O O O O O O O O - O - O - O - - - - - - - - 48 dB/oct O O O O O O O O O O O O O O O O O O O O DME32-Owner's Manual