Yamaha DME32 DME32 Owners Manual - Page 219

214 Chapter 11-GPI Interface Assigning GPI Inputs Scenes 1 through 99, configurations A or B, component parameters, or emergency can be assigned to the GPI inputs. 1 Choose GPI from the Tool menu. The GPI window appears. 2 Click the IN tab if the IN page is not already shown. The IN page appears, as shown below. 3 Select a DME32 (GPI Select: UNIT) and GPI input (GPI Select: GPI CH). 4 To assign a scene, click the Scene Change button, and then click a Scene Select button from 1 through 99. Use the scroll bar to see all the scene buttons. 5 To assign a component parameter, click the Parameter button, and then select a DME32 (UNIT), component, and parameter. Then set the Terminal Usage. 6 To assign a configuration, click the Configuration Change button, and then click a Configuration Select button, either A or B. 7 To assign an input for use with Emergency mode, click the Emergency button. See "Emergency Mode" on page 220 for more information. 8 To delete an assignment for the selected GPI input, click CLEAR. 9 Click OK to save your settings, or click Cancel to leave them unchanged. The GPI window closes. DME32-Owner's Manual