Yamaha DME32 DME32 Owners Manual - Page 253

Saving MIDI Settings 249 The format for Parameter Change messages is as follows: STATUS 11110000 F0 System Exclusive Message ID No. 01000011 43 Manufacturer's ID No.(YAMAHA) SUB STATUS 0001nnnn 1n parameter change or response for request n=0-15 (Device Channel No.1-16) GROUP ID 00111110 3E group ID (digital mixer) MODEL ID 00000101 05 Device code (DME32) PARAM TYPE 00000000 00 byte operation for edit buffer DATA 0000aaaa dd1 Parameter No. (H high order bit) 0000bbbb dd2 Parameter No. (H low order bit) 0000cccc dd3 Parameter No. (L high order bit) 0000dddd dd4 Parameter No. (L low order bit) 0000eeee dd5 Parameter value (H high order bit) 0000ffff dd6 Parameter value (H low order bit) 0000gggg dd7 Parameter value (L high order bit) 0000hhhh dd8 Parameter value (L low order bit) EOX 11110111 F7 End Of Exclusive For reference, Parameter No. values can be printed from DME Manager. Saving MIDI Settings 1 Choose MIDI from the Tool menu-the main MIDI window appears. 2 Click File-the MIDI window appears, as shown below. 3 In the Mode section, select Save. 4 In the Save File Name field, enter a title for the MIDI settings. Titles can be up to 24 characters long. Click the Clear button to clear the title if you want to start again. 5 Click Save. The MIDI settings are saved and the MIDI window closes. If a file with the same title already exists, an overwrite confirmation message appears. Click OK to overwrite and continue, or click Cancel to cancel the operation. MIDI settings are saved in the "Midi" folder, which is located inside the DME Manager program folder. MIDI settings files can be managed (e.g., copied, deleted, backed up, etc.) just like any other Windows file. DME32-Owner's Manual