Yamaha DME32 DME32 Owners Manual - Page 189

184 Chapter 9-Component Guide Part II The sound image can be moved directly to a position by clicking within the surround pan graph, or directly to one of the six buttons along the front and rear edges of the graph. Buttons with speaker icons represent the components outputs. Section Parameter Range Description ORBIT Orbit buttons WIDTH X OFFSET DEPTH Y OFFSET CSR SOUND IMAGE POSITION SPEED See page 180 for information on the orbits 0-63/L63-C-R63 L63-C-R63 0-63/F63-C-R63 F63-C-R63 0.0-1.0 0-10 Selects an orbit for sound-image movement Adjusts the width of the orbit Adjusts the X (left-right) position of the orbit Adjusts the depth of the orbit Adjusts the Y (front-rear) position of the orbit Adjusts the amount of front-center signal fed to the L, R, and C outputs. Sets the continuous movement speed When the CSR (center-side ratio) control is set to 0, the front-center signal is fed only to the L and R outputs. When it's set to 0.5, the front-center signal is fed equally to the L, R, and C outputs. And when it's set to 1.0, the front-center signal is fed only to the C output. DME32-Owner's Manual