Yamaha DME32 DME32 Owners Manual - Page 215
Checking the I/O Slots, Initializing the DME32, Checking the Firmware Version & Battery
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
210 Chapter 10-Front Panel Operation Checking the I/O Slots You can check the type of I/O card installed in each slot by using the Slot function. 1 Use the [UTILITY] button to select the "Slot" function. SCENE NO. 0i CONFIGURATION SCENE SLOTX1:MY4_ADXX2:MY4_DA XXXXX3:0x11XXXX4:MY8_AE For slots that contain no cards, "0x11" is displayed. 2 Press the [UTILITY] button repeatedly until the UTILITY indicator goes out. Initializing the DME32 You can reset the DME32 to its initial settings as follows. 1 Turn off the DME32. 2 While holding down the [RECALL] button, turn on the DME32. 3 When the Diagnostics display appears, press the [RECALL] button. The DME32 is initialized. Initializing the DME32 deletes any previously set password. When the number of DME32s in a multiple-unit system is changed (e.g., DME32s are added or removed), all DME32s must be initialized. Checking the Firmware Version & Battery You can check the date and version number of the DME32 firmware and battery voltage as follows. 1 Turn off the DME32. 2 While holding down the [UTILITY] button, turn on the DME32. The firmware date and version number, battery voltage, and, if set, password appear on the display, as shown below. CONFIGURATION SCENE F/WXVer.:1.00X2000,03,01 Password:1234XBAT:3.20V If no password has been set, "----" appears instead. DME32-Owner's Manual