Yamaha DME32 DME32 Owners Manual - Page 93

86 Chapter 7-Other DME Designer Functions Assigning the User Define Button The front panel [USER DEFINE] button can provide direct access to a specific parameter. Different user define settings can be stored in each scene. 1 Choose User Define Button from the Tool menu. The User Define Button window opens, as shown below. The User Define Button parameters are explained in the following table. Section Parameter Range Description Unit Assign 1-4 Componen t Parameter LCD Disp 1 2 Up to 15 characters Selects the DME32 whose [USER DEFINE] button is to be assigned Selects the component whose parameter is to be assigned Selects the parameter to be assigned The text that appears on the DME32 display when its [USER DEFINE] button is pressed 1. Components in the current configuration can be selected. 2. Depends on the selected component. 2 Make the required settings and then click Apply to apply your settings and leave the User Define Button window open, click OK to apply your settings and close the window, or click Cancel to leave the settings unchanged and close the window. 3 Use the Offline Edit window to save your settings to a scene. The User Define Button window closes. Using the Apply button instead of the OK button is convenient when working offline, as it allows you to edit and view user define button settings for each scene without having to keep opening and closing the User Define Button window. You must compile and transfer the configuration to the DME32 for the User Define Button settings to take effect. See "How to Build & Edit Configurations" on page 44 for more information. For information on using the [USER DEFINE] button, see "Editing Parameters & the User Define Button" on page 201. DME32-Owner's Manual