Yamaha DME32 DME32 Owners Manual - Page 250
Assigning Component Parameters to Control Changes
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
246 Chapter 15-MIDI Assigning Component Parameters to Control Changes Parameters can be assigned to MIDI Control Changes 0 through 119, and an additional byte can be used to provide a higher resolution for more precise control of parameters with a large range. A table for you to note assignments is provided on page 280. 1 Choose MIDI from the Tool menu. The MIDI window appears. 2 Click the Control Change tab. The Control Change page appears, as shown below. 3 Select the Control Change that you want to assign and then click Assign, or simply double-click the Control Change number. The Control Change window appears, as shown below. 4 Make the required settings and then click OK to save them, or click Cancel to leave them unchanged. The Control Change window closes. If a parameter has already been assigned to the selected Control Change, an overwrite confirmation message appears. Click OK to overwrite the previous assignment, or click Cancel to keep it. DME32-Owner's Manual