Yamaha DME32 DME32 Owners Manual - Page 173
A BPF band-pass, quency while allowing a band of signals around that frequency to pass through unaf
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
168 Chapter 9-Component Guide Part II BPF A BPF (band-pass filter) attenuates signals above and below the specified center frequency while allowing a band of signals around that frequency to pass through unaffected. The BPF component features one input and one output. The BPF control window features INPUT, filter, and OUTPUT sections. The BPF component parameters are explained in the following table. Section Parameter Range Description ON/OFF INPUT LEVEL PHASE Filter FREQ Q OUTPUT LEVEL MUTE ON/OFF -Infinity dB to 0.0 dB NOR/REV 20.0 Hz-20.0 kHz 10-0.10 -Infinity dB to 0.0 dB ON/OFF Turns the component on and off Adjusts the input signal level Inverts the input signal Adjusts the BPF center frequency Adjusts the filter's selectivity Adjusts the output signal level Mutes the output DME32-Owner's Manual