Yamaha DME32 DME32 Owners Manual - Page 124
Comp 1, output meters display the level of the output signals.
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
118 Chapter 8-Component Guide Part I Comp 1 The COMP 1 page features compressors for the low and low-mid channels, with gain reduction (GR) meters, compressor curves, and output level meters. The gain reduction (GR) meters display the amount of gain reduction being applied by the Compressors. The compressor curves display the effect of the Compressors. The output meters display the level of the output signals. The compressor parameters for all channels are explained in the following table. Parameter Range Description THRESHOLD RATIO KNEE ATTACK RELEASE GAIN ON/OFF -54 dB to 0 dB 1:1 to Infinity:1 HARD, 1, 2, 3, 4, 5 0 ms-120 ms 1 0.0 dB to +18.0 dB ON/OFF Adjusts the threshold level Adjusts the compression ratio Adjusts the Compressor's "hardness" Adjusts the attack time Adjusts the release time Adjusts the output gain Turns the Compressor on and off 1. 5 ms-42.3 sec (fs = 48 kHz), 6 ms-46.0 sec (fs = 44.1 kHz) See page 128 for more general information on compressor parameters. DME32-Owner's Manual