Yamaha DME32 DME32 Owners Manual - Page 30

22 Chapter 4-Touring DME Manager Modes DME Manager has three operating modes: Edit, Cable, and Run. These can be selected from the Mode menu (see page 35), Shortcut menu (see page 39), Tool Bar (see page 24), Tool Palette (see page 41), or Alt menu (see page 41). The currently selected mode is displayed in the status bar. See "Status bar" on page 25 for more information. Edit Mode Edit mode is used to build and edit configurations. It can also be used to edit scenes offline. See "Building Configurations" on page 43 for more information. Cable Mode Cable mode is used to wire components together. See "Adding Wires" on page 51 for more information. Run Mode Run mode is used to control the DME32 system in real time, which includes editing component parameters, storing and recalling scenes, and recalling configurations. In Run mode, actions performed on DME Manager are reflected on the DME32 and vice versa. Components and wires cannot be edited in this mode. See "Running the System" on page 65 for more information. Configurations can be compiled and configuration data can be transferred between the DME32 and DME Manager in either Edit or Cable mode. DME32-Owner's Manual