Yamaha DME32 DME32 Owners Manual - Page 211
Temporarily Disabling the Protection System, password, Enter, Shift, Protect, Mode?
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
206 Chapter 10-Front Panel Operation Temporarily Disabling the Protection System The protection system can be temporarily disabled to allow editing by authorized users. 1 Press the [PROTECT] button. The Enter password display appears, as shown below. SCENE NO. 0i CONFIGURATION SCENE EnterXpassword XXXXpasswordX= 2 Use the SCENE RECALL number keypad to enter the password. An asterisk appears as each number is entered, as shown below. SCENE NO. 0i CONFIGURATION SCENE EnterXPassword XXXXpasswordX=X**** 3 Press the [RECALL] button. If the correct password is entered, the protection is disabled and the PROTECT indicator goes out. If the password is incorrect, the Change password display appears. Press the [VALUE] button to cancel this display. While the protection system is temporarily disabled, scenes can be stored and recalled and parameters can be edited as normal. 4 To turn the protection system back on again, press the [PROTECT] button. The Shift to Protect Mode display appears, as shown below. SCENE NO. 0i CONFIGURATION SCENE ShiftXtoXProtectXMode? XXXXXXXXXXNoXXXXXXXYes 5 Press the [VALUE] button to enable Full Protect mode, or press the [PARAMETER] button to cancel. Full Protect mode is enabled and the PROTECT indicator lights up. If you forget the password, see "Checking the Firmware Version & Battery" on page 210. DME32-Owner's Manual