Yamaha DME32 DME32 Owners Manual - Page 167

162 Chapter 9-Component Guide Part II EQ There are eight components in the EQ group. Five PEQs (parametric equalizers) and three GEQs (graphic equalizers). PEQ A PEQ (parametric equalizer) is used to boost or cut signals at specified frequencies. All PEQ components feature one input and one output. Since the only difference between all the PEQ components is the number of bands, only the 4 BAND PEQ control window is shown here. Each PEQ control window features an EQ graph and INPUT, EQ BAND, and OUTPUT sections. The PEQ component parameters are explained in the following table. Section Parameter Range Description ON/OFF INPUT LEVEL PHASE Q F EQ BAND G ON/OFF Type1 OUTPUT LEVEL MUTE ON/OFF -Infinity dB to 0.0 dB NOR/REV 10-0.10 20.0 Hz-20.0 kHz -18 dB to +18 dB ON/OFF Peaking/L.Shelf or H.Shelf -Infinity dB to 0.0 dB ON/OFF Turns the component on and off Adjusts the input signal level Inverts the input signal Adjusts the selectivity of each band Adjusts the frequency of each band Adjusts the gain of each band Turns each band on and off Sets the filter type for the band Adjusts the output signal level Mutes the output 1. Top and bottom bands only. DME32-Owner's Manual