Yamaha DME32 DME32 Owners Manual - Page 191
Parameter, Range, Description, ORBIT, Orbit, buttons, WIDTH, X OFFSET, DEPTH, Y OFFSET,
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
186 Chapter 9-Component Guide Part II The sound image can be moved directly to a position by clicking within the surround pan graph, or directly to one of the six buttons along the front and rear edges of the graph. Buttons with speaker icons represent the components outputs. Section Parameter Range Description ORBIT Orbit buttons WIDTH X OFFSET DEPTH Y OFFSET CSR SUB WOOFER SOUND IMAGE POSITION Level SPEED See page 180 for information on the orbits 0-63/L63-C-R63 L63-C-R63 0-63/F63-C-R63 F63-C-R63 0.0-1.0 -Inf dB to 6.0 dB 0-10 Selects an orbit for sound-image movement Adjusts the width of the orbit Adjusts the X (left-right) position of the orbit Adjusts the depth of the orbit Adjusts the Y (front-rear) position of the orbit Adjusts the amount of front-center signal fed to the L, R, and C outputs. Adjusts the level of the subwoofer signal Sets the continuous movement speed When the CSR (center-side ratio) control is set to 0, the front-center signal is fed only to the L and R outputs. When it's set to 0.5, the front-center signal is fed equally to the L, R, and C outputs. And when it's set to 1.0, the front-center signal is fed only to the C output. DME32-Owner's Manual