Yamaha DME32 DME32 Owners Manual - Page 85

78 Chapter 7-Other DME Designer Functions Linking Component Parameters Component parameters can be linked into groups. When a parameter in a group is adjusted, the other parameters in that group are also adjusted. Parameter linking allows simultaneous control of independent signals and can be used, for example, to control fader groups, stereo signals, or crossover frequencies in multiple speaker systems. In multiple-unit systems, component parameters can be linked across DME32s. Different parameter link settings can be stored in each scene. 1 Choose Parameter Link from the Component menu. The Parameter Link window appears, as shown below. The Groups section lists all the existing groups, while the Linked Parameters section lists all the parameters in the selected group, including the unit and component they belong to. 2 To create a new group, click Add. Up to 32 groups can be created. To edit an existing group, select the group from the Groups list, and then click Edit. To delete an existing group, select the group from the Groups list, and then click Delete. The Link Group Edit window appears, as shown below. The number of the selected group appears in the upper-left corner of the window. The Components section lists all the components in each section of the configuration window (i.e., the components for each DME32) and the Parameters section lists all the parameters available for that component. DME32-Owner's Manual