Yamaha DME32 DME32 Owners Manual - Page 284

MIDI Data Format 283 MIDI Data Format 1. Transmit/Receive Data 1.1 Program Change When a Program Change message is received, the scene specified in the [Program Change Assign Table] is recalled. Program Change messages are transmitted according to the [Program Change Assign Table]. If a scene memory number has been assigned to more than one Program Change, the lowest-numbered Program Change is transmitted. 1.2 Control Change When a Control Change message is received, the parameter specified in the [Control Change Assign Table] is edited. When a parameter specified in the [Control Change Assign Table] is edited, a Control Change message for that control change number is transmitted. If a parameter has been assigned to more than one Control Change, the lowest-numbered Control Change is transmitted. 1.3 Parameter Change Parameter value changes are transmitted and received. If [Parameter Change Tx] is ON, these messages are transmitted when the value of a parameter is changed. These messages can be received when [Parameter Change Rx] is ON. 2. DME32 Settings and Operation 2.1 MIDI Setup 2.1.1 MIDI Channel 2.1.1.1 Transmit Channel Specify the MIDI channel for transmission. 2.1.1.2 Receive Channel Specify the MIDI channel that will be used for reception. As a rule, MIDI messages are received only if the MIDI channel matches, but this is not the case if OMNI is ON. 2.1.2 ON/OFF 2.1.2.1 Program Change Enable or disable reception and transmission. If OMNI is ON, these messages are received regardless of the MIDI channel. If ECHO is ON, they are echoed regardless of the channel. 2.1.2.2 Control Change Enable or disable reception and transmission. If OMNI is ON, these messages are received regardless of the MIDI channel. If ECHO is ON, they are echoed regardless of the channel. 2.1.2.3 Parameter Change Enable or disable reception and transmission. If ECHO is ON, these messages are echoed regardless of the channel. DME32-Owner's Manual