Yamaha DME32 DME32 Owners Manual - Page 74

Run Mode Controller 67 Run Mode Controller The Run Mode Controller, which appears automatically when Run mode is selected, is used to recall DME32 configurations and to store and recall scenes just like using the DME32 front panel. It appears only when Run mode is selected and cannot be accessed from the menus or elsewhere. The layout of the Run Mode Controller depends on whether it's being used to control configurations or scenes, and this is set by clicking the Scene/Config button. Configuration Control When configuration control is selected, the Run Mode Controller appears as shown below. 23 1 45 6 7 A Configuration number This displays the number of the current configuration. When the other configuration is selected, its number flashes until that configuration is recalled. B Edit indicator This indicator is unavailable with configuration control. C Selector buttons These buttons are used to select the configurations. D Scene/Config indicator This indicates whether configuration control or scene control is selected. E Scene/Config button This button toggles between configuration control and scene control. F Configuration title This section displays the title of the current configuration. When the other configuration is selected, its title appears. G Recall button This button is used to recall the selected configuration. If the selected configuration memory contains no data, this button is unavailable. DME32-Owner's Manual