Yamaha DME32 DME32 Owners Manual - Page 274

272 Appendix A: General Message Reason Solution The DME32 configuration data has changed. Receive data from DME32? This component is protected! This operation is protected! Too many components for DME32 #! You must enter a title for the configuration! You must enter a title for the user module! Available resources are low. Further editing is not recommended. Delete some components or restart the program to resolve the problem. The configuration data has changed on the DME32. This may due, for example, to the wordclock setting being changed from the front panel, or a configuration being loaded from a PC Card. An attempt was made to edit a protected component. An attempt was made to use a protected operation. The maximum number of components for the specified DME32 has been exceeded. An attempt was made to send a configuration, but no configuration was selected, or no title was entered. An attempt was made to save a user module, but no title was entered. This message warns that Windows resources are getting low, perhaps because there are many configuration windows open, or several programs are running simultaneously. If you continue using DME Manager, Windows may suddenly quit DME Manager. Click OK to receive the updated configuration data from the DME32. Turn off the component's protection, and then try editing again. Turn off the Operation or Component protection, and then try again. Delete any unused components in order to free up resources, and then add the new component. Select a configuration, or enter a title, and then try sending again. Enter a title, and then try saving again. Close some configuration windows, quit some other programs, or restart DME Manager. DME32-Owner's Manual