Yamaha DME32 DME32 Owners Manual - Page 111

Crossover Processor 105 The crossover parameters are explained in the following table. Section Parameter Range Description LOW HIGH FREQ HPF SLOPE 20.0 Hz-20.0 kHz Adjusts the low HPF cutoff frequency 1 Sets the low HPF filter slope FREQ 20.0 Hz-20.0 kHz Adjusts the low LPF cutoff frequency LPF Gc2 -6 dB to +6 dB Adjusts the low LPF gain at the cutoff frequency SLOPE & TYPE 3 Selects the filter low LPF slope and type FREQ 20.0 Hz-20.0 kHz Adjusts the high HPF cutoff frequency HPF Gc2 -6 dB to +6 dB Adjusts the high HPF gain at the cutoff frequency SLOPE & TYPE 2 Selects the high HPF filter slope and type 1. THRU (filter off), 6dB/oct, 12dB/oct, 18dB/oct, 24dB/oct (Butterworth). 2. Gc controls appears only when a Gc SLOPE & TYPE filter is selected. For Butterworth, Bessel, and Linkwitz-Riley, the Gc setting is ignored and the Gc value is fixed as follows: Butterworth and Bessel: -3 dB, Linkwitz-Riley: -6 dB. 3. SLOPE & TYPE parameter values are as follows: THRU (filter off) 6dB/oct 12dB/oct Adjustable Gc 12dB/oct Butterworth 12dB/oct Bessel 12dB/oct Linkwitz-Riley 18dB/oct Adjustable Gc 18dB/oct Butterworth 18dB/oct Bessel 24dB/oct Adjustable Gc 24dB/oct Butterworth 24dB/oct Bessel 24dB/oct Linkwitz-Riley 36dB/oct Adjustable Gc 36dB/oct Butterworth 36dB/oct Bessel 48dB/oct Adjustable Gc 48dB/oct Butterworth 48dB/oct Bessel 48dB/oct Linkwitz-Riley EQ The EQ page features 3-band parametric EQ for the low and high channels. The EQ graph above each set of controls displays the EQ settings graphically. The EQ parameters for both channels explained in the following table. Section LOW, HIGH Parameter Range Q F G ON/OFF 10.0-0.1 20.0 Hz-20.0 kHz -18 dB to +18 dB ON/OFF Description Adjusts the selectivity of each band Adjusts the frequency of each band Adjusts the gain of each band Turns the EQ on and off DME32-Owner's Manual