ZyXEL VMG1312-B10A User Guide - Page 103
The WPS Screen
View all ZyXEL VMG1312-B10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 7 Wireless Use this screen to view your Device's MAC filter settings and add new MAC filter rules. Click Network Setting > Wireless > MAC Authentication. The screen appears as shown. Figure 37 Wireless > MAC Authentication The following table describes the labels in this screen. Table 22 Wireless > MAC Authentication LABEL SSID MAC Restrict Mode DESCRIPTION Select the SSID for which you want to configure MAC filter settings. Define the filter action for the list of MAC addresses in the MAC Address table. Select Disable to turn off MAC filtering. Select Deny to block access to the Device. MAC addresses not listed will be allowed to access the Device. Add new MAC address # MAC Address Delete Apply Cancel Select Allow to permit access to the Device. MAC addresses not listed will be denied access to the Device. Click this if you want to add a new MAC address entry to the MAC filter list below. Enter the MAC addresses of the wireless devices that are allowed or denied access to the Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. This is the index number of the entry. This is the MAC addresses of the wireless devices that are allowed or denied access to the Device. Click the Delete icon to delete the entry. Click Apply to save your changes. Click Cancel to exit this screen without saving. 7.5 The WPS Screen Use this screen to configure WiFi Protected Setup (WPS) on your Device. VMG1312-B Series User's Guide 103