ZyXEL VMG1312-B10A User Guide - Page 146
Add/Edit Policy Forwarding
View all ZyXEL VMG1312-B10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Chapter 9 Routing 9.4.1 Add/Edit Policy Forwarding Click Add new Policy Forward Rule in the Policy Forwarding screen or click the Edit icon next to a policy. Use this screen to configure the required information for a policy route. Figure 67 Policy Forwarding: Add/Edit The following table describes the labels in this screen. Table 43 Policy Forwarding: Add/Edit LABEL DESCRIPTION Policy Name Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces. Source IP Enter the source IP address. Source Subnet Enter the source subnet mask address. Mask Protocol Select the transport layer protocol (TCP or UDP). Source Port Enter the source port number. Source MAC Enter the source MAC address. WAN Select a WAN interface through which the traffic is sent. You must have the WAN interface(s) already configured in the Broadband screens. Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. 9.5 RIP Routing Information Protocol (RIP, RFC 1058 and RFC 1389) allows a device to exchange routing information with other routers. VMG1312-B Series User's Guide 146