ZyXEL VMG1312-B10A User Guide - Page 221

Chapter 20 Parental Control Figure 123 Parental Control Rule: Add/Edit Rule > Add Keyword The following table describes the fields in this screen. Table 92 Parental Control Rule: Add/Edit LABEL DESCRIPTION General Active Select the checkbox to activate this parental control rule. Parental Control Profile Name Enter a descriptive name for the rule. Home Network User Select the LAN user that you want to apply this rule to from the drop-down list box. If you select Custom, enter the LAN user's MAC address. If you select All, the rule applies to all LAN users. Rule List In Home Network User, select Custom, enter the LAN user's MAC address, then click the + sign to enter a computer MAC address for this PCP. Up to five are allowed. Click the - sign to remove one. Internet Access Schedule Day Select check boxes for the days that you want the Device to perform parental control. Time Drag the time bar to define the time that the LAN user is allowed access (Authorized access) or denied access (No access). Click the + sign above the time bar to add a new time bar. Up to three are allowed. Authorized Select this to allow access for the times defined above. access No access Select this to deny access for the times defined above. Network Service Network If you select Block, the Device prohibits the users from viewing the Web sites with the URLs Service Setting listed below. Add new service # Service Name Protocol:Port If you select Allow, the Device blocks access to all URLs except ones listed below. Click this to show a screen in which you can add a new service rule. You can configure the Service Name, Protocol, and Name of the new rule. This shows the index number of the rule. Select the checkbox next to the rule to activate it. This shows the name of the rule. This shows the protocol and the port of the rule. VMG1312-B Series User's Guide 221