ZyXEL VMG1312-B10A User Guide - Page 147
The RIP Screen
View all ZyXEL VMG1312-B10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 9 Routing 9.5.1 The RIP Screen Click Network Setting > Routing > RIP to open the RIP screen. Figure 68 RIP The following table describes the labels in this screen. Table 44 RIP LABEL # Interface Version Operation Enabled Apply DESCRIPTION This is the index of the interface in which the RIP setting is used. This is the name of the interface in which the RIP setting is used. The RIP version controls the format and the broadcasting method of the RIP packets that the Device sends (it recognizes both formats when receiving). RIP version 1 is universally supported but RIP version 2 carries more information. RIP version 1 is probably adequate for most networks, unless you have an unusual network topology. Select Passive to have the Device update the routing table based on the RIP packets received from neighbors but not advertise its route information to other routers in this interface. Select Active to have the Device advertise its route information and also listen for routing updates from neighboring routers. Select the check box to activate the settings. Click Apply to save your changes back to the Device. VMG1312-B Series User's Guide 147