ZyXEL VMG1312-B10A User Guide - Page 279
Device Access and Login
View all ZyXEL VMG1312-B10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Chapter 41 Troubleshooting 5 If the problem continues, contact the vendor. 41.2 Device Access and Login I forgot the IP address for the Device. 1 The default LAN IP address is 192.168.1.1. 2 If you changed the IP address and have forgotten it, you might get the IP address of the Device by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the Device (it depends on the network), so enter this IP address in your Internet browser. 3 If this does not work, you have to reset the device to its factory defaults. See Section 1.6 on page 21. I forgot the password. 1 See the cover page for the default login names and associated passwords. 2 If those do not work, you have to reset the device to its factory defaults. See Section 1.6 on page 21. I cannot see or access the Login screen in the web configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.1. • If you changed the IP address (Section 8.2 on page 127), use the new IP address. • If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I forgot the IP address for the Device. 2 Check the hardware connections, and make sure the LEDs are behaving as expected. See Section 1.5 on page 20. 3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. 4 If it is possible to log in from another interface, check the service control settings for HTTP and HTTPS (Maintenance > Remote MGMT). VMG1312-B Series User's Guide 279