ZyXEL VMG1312-B10A User Guide - Page 256
Table 115, Label, Description
View all ZyXEL VMG1312-B10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Chapter 32 TR-069 Client The following table describes the fields in this screen. Table 115 Maintenance > TR-069 Client LABEL Inform DESCRIPTION Select Enable for the Device to send periodic inform via TR-069 on the WAN. Otherwise, select Disable. Inform Interval ACS URL Enter the time interval (in seconds) at which the Device sends information to the autoconfiguration server. Enter the URL or IP address of the auto-configuration server. ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server. ACS Password Enter the TR-069 password for authentication with the auto-configuration server. WAN Interface used by TR-069 client Select a WAN interface through which the TR-069 traffic passes. If you select Any_WAN, the Device automatically passes the TR-069 traffic when any WAN connection is up. If you select Multi_WAN, you also need to select two or more pre-configured WAN interfaces. The Device automatically passes the TR-069 traffic when one of the selected WAN connections is up. Display SOAP messages on serial console Select Enable to show the SOAP messages on the console. Connection Request Authentication Select this option to enable authentication when there is a connection request from the ACS. Connection Request User Name Enter the connection request user name. When the ACS makes a connection request to the Device, this user name is used to authenticate the ACS. Connection Request Password Enter the connection request password. When the ACS makes a connection request to the Device, this password is used to authenticate the ACS. Connection Request URL Local certificate used by TR-069 client This shows the connection request URL. The ACS can use this URL to make a connection request to the Device. You can choose a local certificate used by TR-069 client. The local certificate should be imported in the Security > Certificates > Local Certificates screen. Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. VMG1312-B Series User's Guide 256